DLPI Programmer's Guide

Chapter 2 101
DLPI Primitives
Connection-mode Service Primitives
DL_HP_SET_REJ_TO_REQ
Requests the DLS provider to set the REJ timeout to the specified value.
Format
typedef struct {
u_long dl_primitive;
u_long dl_rej_to;
} dl_hp_set_rej_to_req_t;
Parameters
dl_primitive
DL_HP_SET_REJ_TO_REQ
dl_rej_to
new value of the REJ timeout in tenths of a second. The REJ timeout
determines the length of time that LLC Type 2 will wait for a
response to a REJ PDU before attempting to force a response.
State
The message is valid in the states DL_IDLE, DL_DATAXFER,
DL_OUTCON_PENDING, DL_INCON_PENDING,
DL_USER_RESET_PENDING, and DL_PROV_RESET_PENDING.
New State
The resulting state is unchanged.
Response
If the primitive is issued from a valid state, the DLS provider responds
with a DL_OK_ACK. Otherwise a DL_ERROR_ACK is returned.
Reasons for Failure
DL_OUTSTATE
Primitive was issued from an invalid state.
DL_HP_SET_BUSY_TO_REQ
Requests the DLS provider to set the BUSY timeout to the specified
value.
Format