DHCPv6 2.001 Release Notes
DHCPv6 Release Notes
Installing DHCPv6 2.001
Chapter 1 13
Installing DHCPv6 2.001
Read this chapter before installing the DHCPv6 depot. You can install DHCPv6 2.001 only on
a dual stack system.
NOTE DHCPv6 available in the base HP-UX 11i v2 operating system is not
compatible with this Web upgrade of DHCPv6 2.001 on HP-UX 11i v2.
Prerequisites
The following sections discuss prerequisites for installing DHCPv6 2.001 on the HP-UX 11i v1
and HP-UX 11i v2 operating systems.
HP-UX 11i v1
The following are the prerequisites to install the DHCPv6 2.001 software depot on the HP-UX
11i v1 operating system:
• 32- or 64-bit HP-UX 11i v1 (B.11.11) PA-RISC system
• IPv6 bundle (IPv6NCF11i) or Transport Optional Upgrade Release (TOUR) 2.0/2.2
• Transport patch - PHNE_28895 (or its superceded patch)
NOTE You can download the IPv6 software from the HP software depot at
http://www.software.hp.com (Search for the HP-UX IPv6 Product).
You can download the PHNE_28895 Transport patch (or its superceded patch)
from http://www.itrc.hp.com.
HP-UX 11i v2
HP-UX 11i v2 customers can optionally install the PHNE_31736 patch to obtain the fix for the
following defect SR 8606326543.
Installation Instructions
To install DHCPv6 2.001, complete the following steps: