Understanding HP Instant Capacity (iCAP) version 6.x and 7.x Codewords Whitepaper

More cores active than expected
This system has two cores without usage rights. However, there are no cores that are inactive. Also,
since this system does not have any available TiCAP, the activation of the cores cannot be covered
using TiCAP. The two cores must be deactivated to remove the exception.
# icod_stat
Software version: B.06.50
System ID: sys1
Serial number: USE1234567
Product number: A6912A
Unique ID: Z3e119df0de85bc9c
System contact e-mail: Not set
From e-mail: Set to the default ('adm')
Asset reporting: on
Exception status: More processors active than expected
Local Hard Partition Information
--------------------------------
Total processors: 8
Intended Active processors: 8
Active processors: 8
Licensed processors that can be activated: 0
Processors that can be activated if licensed: 0
Processors that cannot immediately be activated: 0
Global iCOD Information
-----------------------
iCOD cells: 0
Actual inactive cells: 0
iCOD processors: 2
Actual inactive processors: 0
iCOD Memory: 0.0 GB
Actual inactive Memory: 0.0 GB
Unlicensed processors that must be deactivated: 2
Temporary capacity available: 0 days, 0 hours, 0
minutes
Allocation of iCOD Resources Among Partitions
-------------------------------------------------------------
nPar Inactive Inactive Inactive
ID Cells Memory CPUs nPar Name
==== ======== =========== ======== ======================
0 0 0.0 GB 0 Partition 0 (local)
N/A 0 0.0 GB 0 Unassigned Cells
iCOD Partition Configuration Information
-----------------------------------------------------------------
Intended Actual Compatible
nPar Active Active Total Software
ID CPUs CPUs CPUs Installed nPar Name
==== ======== ====== ===== ========== ======================
0 8 8 8 Yes Partition 0 (local)
23