Understanding HP Instant Capacity (iCAP) version 6.x and 7.x Codewords Whitepaper

Apply the upgrade codeword retrieved from the portal
# icod_modify –C pMD9E8b.fzHbWmg.jF5jMjj.1L4XAw9-
y82a83D.s8UxBEu.mX5k4NJ.vabagj6
The following valid codeword has been applied to the complex:
Upgrade Codeword
1 CPUs
0 Cells
0.0 GB of Memory
0 days, 0 hours, 0 minutes
Use icod_stat(1M) to see the results of the application of this codeword.
Results of applying the upgrade codeword
# icod_stat
Software version: B.06.50
System ID: sys1
Serial number: USE1234567
Product number: A6912A
Unique ID: Z3e119df0de85bc9c
System contact e-mail: Not set
From e-mail: Set to the default ('adm')
Asset reporting: on
Exception status: No exception
Local Hard Partition Information
--------------------------------
Total processors: 8
Intended Active processors: 8
Active processors: 7
Licensed processors that can be activated: 0
Processors that can be activated if licensed: 1
Processors that cannot immediately be activated: 0
Global iCOD Information
-----------------------
iCOD cells: 0
Actual inactive cells: 0
iCOD processors: 1
Actual inactive processors: 1
iCOD Memory: 0.0 GB
Actual inactive Memory: 0.0 GB
Unlicensed processors that must be deactivated: 0
Temporary capacity available: 0 days, 0 hours, 0
minutes
Allocation of iCOD Resources Among Partitions
-------------------------------------------------------------
nPar Inactive Inactive Inactive
ID Cells Memory CPUs nPar Name
==== ======== =========== ======== ======================
0 0 0.0 GB 1 Partition 0 (local)
N/A 0 0.0 GB 0 Unassigned Cells
iCOD Partition Configuration Information
-----------------------------------------------------------------
Intended Actual Compatible
nPar Active Active Total Software
ID CPUs CPUs CPUs Installed nPar Name
==== ======== ====== ===== ========== ======================
0 8 7 8 Yes Partition 0 (local)
21