Understanding HP Instant Capacity (iCAP) version 6.x and 7.x Codewords Whitepaper

NOTE: Application of Right-to-Use codewords does not result in the
activation of components. Use icod_stat(1M) to see the results of the
application of this codeword.
For processors: Use icod_modify(1M) to activate the processors.
For cell boards and memory: Use parmodify(1M) to activate cells by
setting the use_on_next_boot flag to 'y' or use parmgr(1M).
Results of applying the RTU codeword
# icod_stat
Software version: B.06.50
System ID: sys1
Serial number: USE1234567
Product number: A6912A
Unique ID: Z3e119df0de85bc9c
System contact e-mail: Not set
From e-mail: Set to the default ('adm')
Asset reporting: on
Exception status: No exception
Local Hard Partition Information
--------------------------------
Total processors: 8
Intended Active processors: 6
Active processors: 6
Licensed processors that can be activated: 1
Processors that can be activated if licensed: 1
Processors that cannot immediately be activated: 0
Global iCOD Information
-----------------------
iCOD cells: 0
Actual inactive cells: 0
iCOD processors: 1
Actual inactive processors: 2
iCOD Memory: 0.0 GB
Actual inactive Memory: 0.0 GB
Processors using temporary capacity: 0
Temporary capacity available: 30 days, 0 hours, 0
minutes
Projected temporary capacity expiration: N/A
Allocation of iCOD Resources Among Partitions
-------------------------------------------------------------
nPar Inactive Inactive Inactive
ID Cells Memory CPUs nPar Name
==== ======== =========== ======== ======================
0 0 0.0 GB 2 Partition 0 (local)
N/A 0 0.0 GB 0 Unassigned Cells
iCOD Partition Configuration Information
-----------------------------------------------------------------
Intended Actual Compatible
nPar Active Active Total Software
ID CPUs CPUs CPUs Installed nPar Name
==== ======== ====== ===== ========== ======================
0 6 6 8 Yes Partition 0 (local)
18