Support Plus User Guide HP-UX 11i Version 1, December 2003

Support Plus User Guide HP-UX 11i v1
Installing the Selected Bundles
Chapter 1 23
swinstall -s system1:/
cdrom /HWEnable11i \
-x patch_match_target=true -x autoreboot=true
You can use the swinstall command’s preview mode (-p option) to
get an idea of what to expect for the bundle you want to install:
swinstall -p -s system1:/
cdrom /HWEnable11i \
-x patch_match_target=true -x autoreboot=true
NOTE If the swinstall interactive user interface appears, then you may need
to enter additional information or take other action such as setting
mount_all_filesystems to false. Include the following option in the
swinstall command:
-x mount_all_filesystems=false
Tips for Using HP-UX 11i v1
•The patch_match_target option was introduced in Software
Distributor (SD-UX) for HP-UX 11.0. Do not use the match_target
option; it will not select patches from the HP_UX 11i v1 Support Plus
CD.
Refer to the Patch Management Guide for HP-UX 11.x for complete
information on patch-related features of SD-UX. Also, see “Getting
More Information” on page 34.
• When using the graphical user interface (GUI) for installing bundles
using the matching operation, choose Manage Patch Selection under
the Actions menu and not Match What Target Has. Then, check the
box “Automatically select patches for software installed on target”.
• HP-UX 11.x depots cannot be hosted on HP-UX 10.x systems; this is
due to data format changes introduced in SD-UX for HP-UX 11.0.
The version of SD-UX on the HP-UX 10.x releases does not support
these data format changes.
•Using the swlist command on an HP-UX 11.0 system to list bundles
on an HP-UX 11i v1 system may generate warnings. For example:
swlist -d -l bundle @ 11isys:/cdrom/HWEnable11i
# Initializing...
# Contacting target "11isys"...