Smart Plug-in for WebLogic Server User's Guide

Chapter 3: Using and Customizing the WebLogic Server SPI
Basic Template Customizations
3-9
To change the Alarm Generation Type, modify the settings below, completing
the steps that follow.
" Reset: Alarms are generated once when the threshold value is
exceeded. At the same time a reset threshold value is activated. Only
when the reset threshold value is exceeded, does the original threshold
value become active again. Then when the threshold value is again
exceeded, another alarm is generated and the process starts all over
again.
" Without Reset. Alarms are generated once when the monitoring
threshold value is exceeded. Alarms reset automatically when metric
values are no longer in violation of the thresholds and are generated
again when the threshold is exceeded.
" Continuously. Messages are sent/alerts generated each time the metric
values are collected and the threshold is exceeded.
The Modify Threshold Monitor Window
1. Open the Message Source Templates window.