Smart Plug-in for WebLogic Server Reference Guide

1-8
Chapter 1
Metric Specification Description
Metric Specification Description
Each metric definition heading denotes a WebLogic Server metric number. The
"B" that precedes the metric number designates the metric as a BEA WebLogic
Server SPI metric.
! WLS-SPI metric numbers range from 0000 to 0999.
! The 0700 to 0799 range is reserved for User Defined Metrics.
WLS-SPI metrics can then be identified as BXXX, where XXX represents the
number assigned to the metric. The parallel metric monitor template name omits
the "B" and begins with "WLSSPI" followed by an underscore and the metric
number. Zeroes are used as necessary to total a four-digit number; for example,
meric number B001 = monitor template WLSSPI_0001
Application Bank reports use the metric number and name; for example, for
metric 5, the report is identified as B005_JVMMemUtilPct.
Monitor Template
Name
Begins always with "WLSSPI," followed by the metric number. Within the monitor
template you can change settings as described in the definition; for example,
threshold value, severity, etc.
Metric Name The name assigned to the metric.
Metric Type Shows how the metric is used, whether for:
Alarming (using monitor template settings),
Reporting (within a report of the separately purchased HP OpenView Reporter),
and/or
Graphing (within a graph of the separately purchased HP OpenView Performance).
Description What the metric represents.
WebLogic 6.0/6.1 or
Both
The WebLogic version 6.0 or 6.1 for which the metric is available.
Severity: Condition The severity of the exceeded threshold condition.
(Critical, Major, Minor, Warning, Normal).
If multiple conditions—for example, graduated thresholds—are defined within the
metric, severity levels are identified according to the specific condition.