Managing Systems and Workgroups: A Guide for HP-UX System Administrators

Setting Up and Administering an HP-UX NFS Diskless Cluster
Obtaining Information About Your Server and Client
Chapter 10910
The output will have one entry for each LAN card in the computer. If the
computer does not have additional LAN cards (that is, if it has only the
built-in LAN card), you will only see the first entry. The LAN hardware
address for your built-in LAN interface will be in the first position
highlighted in the example above.
If the Computer Is
Not Currently
Running
Perform this procedure on the potential client:
1. Turn on your Series 700 workstation and interact with its Boot
Console User Interface (in some models it is called the Boot
Administration Utility).
2. Use the Interface/Utility to determine the address of your system’s
LAN interfaces.
The method for activating the Interface/Utility varies among
workstation models. Check the Owner’s Guide that came with your
system.