Managing Systems and Workgroups: A Guide for HP-UX System Administrators

Planning a Workgroup

Planning your Printer Conﬁguration

Chapter 2 119

For example, you can conﬁgure a Basic Environment, which will have all

objects installed on a single host system. You will need to conﬁgure one

client, one spooler, and one supervisor.

Figure 2-3 Sample HPDPS Basic Environment

In Figure 2-3 on page 119, fancy is a single host system, on which are

installed the HPDPS client, spooler, and supervisor. Attached to fancy is

one locally conﬁgured printer. However, any other printer accessible via

the LAN may be conﬁgured to be used and managed by HPDPS. Also,

any DPS-managed printers on another Basic or Extended system can be

made available locally via Gateway Printers.