Managing Superdome Complexes: A Guide for HP-UX System Administrators

Managing the Overall Complex
Viewing the Current Status of the Complex
Chapter 3 109
Partition Manager
Step 1. Run the Partition Manager (parmgr).
The Partition Manager can be run from:
• an HP-UX command line
• a Web browser
• the System Administration Manager utility (SAM)
For details see “How to Start The Partition Manager” on page 141.
# parstatus -V -b0
[Cabinet]
Cabinet I/O Bulk Power Backplane
Blowers Fans Supplies Power Boards
OK/ OK/ OK/ OK/
Cab Failed/ Failed/ Failed/ Failed/
Num Cabinet Type N Status N Status N Status N Status GSP
=== ============ ========= ========= ========== ============ ======
0 SD32000 4/ 0/ N+ 5/ 0/ ? 3/ 1/ N 3/ 0/ N+ active
Cabinet Blowers
===============
Fan 0 ok
Fan 1 ok
Fan 2 ok
Fan 3 ok
I/O Fans
==============
Fan 0 ok
Fan 1 ok
Fan 2 ok
Fan 3 ok
Fan 4 ok
Bulk Power Supplies(BPS)
========================
Power Supply 0 ok
Power Supply 1 ok
Power Supply 3 failed
Power Supply 4 ok
Backplane Power Boards
======================
Power Supply 0 ok
Power Supply 1 ok
Power Supply 2 ok
Notes: N+ = There are one or more spare items (fans/power supplies).
N = The number of items meets but does not exceed the need.
N- = There are insufficient items to meet the need.
? = The adequacy of the cooling system/power supplies is unknown.
#