Installing and Managing HP-UX Virtual Partitions (A.01.01)
Introduction
Supported Environments
Chapter 1 19
• SCSI Initiator ID
Although you can set the SCSI Initiator ID (the ID of the SCSI
controller) and rate at the BCH prompt, on a vPars computer, you can
also set these values from the UNIX shell of a virtual partition.
For more information, see the vparutil (1M) manpage.
• ioscan output
The ioscan output for vcn and vcs drivers show a value of NO_HW in
the S/W State column. This is normal.