Installing and Administering LAN/9000 Software

74 Chapter4
Troubleshooting LAN/9000
LAN Interface Card Statistics
Administration Status The desired state of the interface It will have one
of the following values:
Operation Status The current operational state of the interface. It will
have one of the following values.
Last Change The value of SysUpTime at the time the interface
entered its current operational state. If the current
state was entered prior to the last reinitialization of the
local network management subsystem, then this object
contains a zero value.
Inbound Octets The total number of octets received on the interface,
including framing characters.
Inbound Unicast Packets The number of subnetwork-unicast packets
delivered to a high-layer protocol.
Inbound Non-Unicast Packets The number of non-unicast
(subnetwork-broadcast or subnetwork-multicast)
packets delivers to a higher-layer protocol.
Inbound Discards The number of inbound packets that were discarded
even though no errors had been detected, to prevent
their being delivered to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space.
Inbound Errors The number of inbound packets that contained errors
preventing them from being deliverable to a
higher-layer protocol.
Table 4-2
up(1) Ready to pass packets
down(2) Not operative
testing(3) In test mode
Table 4-3
up(1) Ready to pass packets
down(2) Not operative
testing(3) In test mode