Installing and Administering LAN/9000 Software

38 Chapter2

Conﬁguring LAN/9000 Using SAM

Step 2: Conﬁguring Network Connectivity

is required for this remote system connection. Use the SAM

on-line help system for information about gateways.

5. Activate the OK button to enable your system to communicate with

this system and return to the Internet Addresses window.

SAM updates the object list to include the remote system you

conﬁgured.

NOTE You can modify or remove remote systems and modify default gateways

by highlighting the Remote System Name from the object list and

choosing Modify, Remove, or Modify Default Gateway from the “Actions”

menu.

6. Choose Exit from the “File” menu.

7. Then Exit SAM from the “File” menu again.

8. Verify remote system conﬁguration.

a. View the list of remote systems you can communicate with using a

symbolic name by typing the following command at the HP-UX

prompt (note that this ﬁle may be large):

more /etc/hosts

b. View the conﬁgured destinations reached through gateways and

the gateways used to reach those destinations by typing the

following command at the HP-UX prompt:

netstat -r

To verify that you can communicate with a remote system using the

LAN/9000 product, continue to “Step 3: Verifying the Installation”.