HP-UX HB v13.00 Ch-21 - Itanium

HP-UX Handbook Rev 13.00 Page 27 (of 35)
Chapter 21 Itanium Architecture (IA)
October 29, 2013
Manage BootNext setting
Set Auto Boot TimeOut
Select Active Console Output Devices
Select Active Console Input Devices
Select Active Standard Error Devices
Cold Reset
Exit
Select the disk, here c1t0d0. This is Pun0,Lun0 (SCSI target 0, Lun 0):
EFI Boot Maintenance Manager ver 1.10 [14.61]
Add a Boot Option. Select a Volume
IA64_EFI [Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD
(Part1,SigB45A0000)
IA64_EFI [Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun0,Lun0)/HD
(Part1,Sig958B0000)
EFI DISK [Acpi(HWP0002,600)/Pci(1|0)/Pci(0|0)/Pci(0|0)/Pci(0|0)/
Scsi(Pun0,Lun0)/HD(Part1,Sig119E1A60-0B4C-01C3-507B-9E5F8078F531)
Removable Media Boot [Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master
Load File [EFI Shell [Built-in]]
Load File [Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E3809C6)]
Load File [Acpi(HWP0002,100)/Pci(2|0)/Mac(00306E3889E3)]
Exit
Now navigate to the HP-UX bootloader HPUX.EFI on the disk:
EFI Boot Maintenance Manager ver 1.10 [14.61]
Select file or change to new directory:
05/28/03 09:38a <DIR> 512 EFI _
[Treat like Removable Media Boot]
Exit
Select file or change to new directory:
05/28/03 09:38a <DIR> 512 .
05/28/03 09:38a <DIR> 0 ..
05/28/03 09:38a <DIR> 512 HPUX
05/28/03 09:38a <DIR> 512 HPUX_single_user _
05/28/03 09:38a <DIR> 512 Intel_Firmware
05/28/03 09:38a <DIR> 512 DIAG
05/28/03 09:38a <DIR> 512 HP
05/28/03 09:38a <DIR> 512 TOOLS
Exit
Select file or change to new directory:
05/28/03 09:38a <DIR> 512 .