HP-UX HB v13.00 Ch-21 - Itanium

HP-UX Handbook – Rev 13.00 Page 17 (of 35)
Chapter 21 Itanium Architecture (IA)
October 29, 2013
/dev/dsk/c2t0d0 /dev/dsk/c2t0d0s2 /dev/rdsk/c2t0d0
/dev/rdsk/c2t0d0s2
/dev/dsk/c2t0d0s1 /dev/dsk/c2t0d0s3 /dev/rdsk/c2t0d0s1
/dev/rdsk/c2t0d0s3
Acpi(000222F0,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig831B783A-296A-11D8-
8002-D6217B60E588)/\EFI\HPUX\HPUX.EFI
disk 2 0/1/1/0.1.0 sdisk CLAIMED DEVICE HP 36.4GST336753LC
/dev/dsk/c2t1d0 /dev/dsk/c2t1d0s2 /dev/rdsk/c2t1d0
/dev/rdsk/c2t1d0s2
/dev/dsk/c2t1d0s1 /dev/dsk/c2t1d0s3 /dev/rdsk/c2t1d0s1
/dev/rdsk/c2t1d0s3
Acpi(000222F0,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part1,SigEDC974D0-3AA3-11D8-
83EC-9C7DD0B67B8B)/\EFI\HPUX\HPUX.EFI
disk 3 0/1/1/1.2.0 sdisk CLAIMED DEVICE HP 36.4GST336753LC
/dev/dsk/c3t2d0 /dev/rdsk/c3t2d0
Acpi(000222F0,100)/Pci(1|1)/Scsi(Pun2,Lun0)/\EFI\HPUX\HPUX.EFI
NOTE: You may enter help at the shell prompt:
Shell> help
List of classes of commands:
boot -- Booting options and disk-related commands
configuration -- Changing and retrieving system information
device -- Getting device, driver and handle information
memory -- Memory related commands
shell -- Basic shell navigation and customization
scripts -- EFI shell-script commands
Use 'help <class>' for a list of commands in that class
Use 'help <command>' for full documentation of a command
Use 'help -a' to display list of all commands
Shell>
If you do not know which fs represents your HP-UX boot disk just try all of them and
search for the HP-UX loader:
Shell> fs2:
fs2:\> ls
Directory of: fs2:\
10/28/02 11:10p <DIR> 512 EFI
10/28/02 11:10p 336 STARTUP.NSH
1 File(s) 336 bytes
1 Dir(s)
fs2:\> type startup.nsh
File: fs2:\startup.nsh, Size 336
#
# Copyright (c) 2000 Hewlett Packard Corporation
#
# HP-UX EFI start-up shell script
#
echo -off
echo ""