HP-UX HB v13.00 Ch-21 - Itanium

HP-UX Handbook – Rev 13.00 Page 16 (of 35)
Chapter 21 Itanium Architecture (IA)
October 29, 2013
fs1 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig831B783A-...
fs2 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part3,Sig831B7880-...
fs3 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part1,SigEDC974D0-...
fs4 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part4,Sig9912850E-...
fs5 : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD(Part1,Sig9C8E9EE8-...
blk0 : Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)
...
...
startup.nsh> echo -off
Welcome to HP-UX for IA64
setting hpux path(\EFI\HPUX)...
type 'fs[x]:' where x is your bootdisk (0, 1, 2...)
type 'hpux' to start hpux bootloader
Shell>
Now we can correlate the hardware device path with the EFI device mapping, e.g.:
fs5: Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD(Part1,Sig9C8E9EE8-...)
Path component
meaning
Acpi(HWP0002,X)
Relevant device is installed to Pci.host bus
(X = PCI host bus number)
Pci(D|F)
PCI installation info.
D = PCI device/slot number. F = PCI function number
Scsi(PunX,LunY)
Physical location of device connected to card. In this case SCSI
disk. X = SCSI ID, Y = LUN ID (c#tXdY in device file)
HD(Part1,Sigxxxxxxxx)
SCSI disk drive information.
Partition and signature
In this case it is the disk at HW path 0/1 /1/ 1. 2.0 with device file c3t2d0
• ACPI(HWP0002,100) correlates with 0/1
• PCI(D, -) correlates with /1/, which is the PCI device or slot number.
• PCI(-, F) correlates with 1., which is the PCI function number.
• SCSI(Pun, Lun) correlates with the final 2.0 which specifies the physical location of the SCSI
device connected to the card.
As of UX 11.23 there is a new –e option for ioscan(1M) that displays EFI partitions:
# ioscan -e -fnkCdisk
Class I H/W Path Driver S/W State H/W Type Description
============================================================================
disk 0 0/0/2/0.0.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-B
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
Acpi(000222F0,0)/Pci(2|0)/Ata(Primary,Master)/\EFI\HPUX\HPUX.EFI
disk 1 0/1/1/0.0.0 sdisk CLAIMED DEVICE HP 36.4GST336753LC