HP-UX HB v13.00 Ch-19 - PRM

HP-UX Handbook – Rev 13.00 Page 27 (of 31)
Chapter 19 Process Resource Manager (PRM)
October 29, 2013
Appendix
PRM Manual Pages
The following manual pages/commands are available with PRM:
prm(1) PRM overview
prmagt(1) HP PRM SNMP read-only agent
prm1d(1) Process Resource Manager (PRM) daemons
prmanalyze(1) Utility that uses the HP-UX system accounting log to generate PRM
group usage statistics. This is useful for configuration planning,
monitoring, and billing.
prmavail(1) Displays resource availability to help plan PRM configurations.
prmconfig(1) Configures, enables, disables and resets PRM. Running prmconfig
prints current configuration, state, and mode information when no
options are specified.
prmlist(1) Displays PRM group, memory, user, compartment, application, disk,
and Unix group record information for the currently loaded PRM
configuration.
prmloadconf(1) Creates a PRM configuration file or updates an existing configuration
file according to user records defined in /etc/passwd.
prmmonitor(1) Prints current Process Resource Manager (PRM) configuration and
resource usage statistics by PRM group.
prmmove(1) Moves one or more processes to the target PRM group PRMgroup.
prmrecover(1) Use this command to recover from abnormal termination of the
memory manager.
prmrun(1) Launches an application in its assigned PRM group, in a specified
PRMgroup, or in the user's initial PRM group.
prmconf(4) Explains the syntax of the PRM configuration files /etc/prmconf.
prmsmhconfig(1) Configure/unconfigure the PRM GUI for SMH.
prminitconfig(1) Configure/unconfigure the PRM GUI for SIM
prm2scomp(1) Generate a minimal configuration for Security Containment based on
a PRM configuration (11.23 or later).
scomp2prm(1) Generate a minimal PRM configuration from a running Security
Containment system (11.23 or later).
srpgen(1) Generate minimal configuration files for Secure Resource Partitions
(11.23 or later).