HP-UX HB v13.00 Ch-17 - vPars

HP-UX Handbook – Rev 13.00 Page 22 (of 46)
Chapter 17 Virtual Partitions (vPars)
October 29, 2013
# vparstatus -p vpar2 -v
[Virtual Partition Details]
Name: vpar2
.
.
.
[IO Details]
1.0.14
1.0.12
1.0.14.0.0.4.0.10.0.0.0.0.0 BOOT
1.0.14.0.0.4.0.5.0.0.0.0.0 TAPE
Create the tape-based recovery archive using make_tape_recovery on vpar2:
# make_tape_recovery -A
To recover vpar2 do the following from vpar1 with the recovery tape inserted in the tape drive
1/0/14/0/0/4/0.5.0:
vpar1# vparboot -p vpar2 -B TAPE
The recovery may continue as a normal tape-based system recovery.
Recovering a Virtual Partition
In chapter 7 of the recent update of the manual “Installing and Managing HP-UX Virtual
Partitions” (http://docs.hp.com/en/7042/T1335-90041.pdf) are detailed procedures for vPars
recovery:
 Using make_net_recovery within a vPars environment
o Recovering a virtual partition from a running vpar
o Recovering all the virtual partitions of a hard partition
 Using make_tape_recovery outside of a vPars environment
o Archiving and recovering a virtual partition using make_tape_recovery
o Archiving and recovering a virtual partition using another virtual partition as the
Ignite-UX server
 Using make_tape_recovery within a vPars environment in conjunction with an
Ignite-UX boot server
 Using make_tape_recovery within a vPars environment