HP-UX HB v13.00 Ch-16 - iCAP

HP-UX Handbook – Rev 13.00 Page 6 (of 24)
Chapter 16 Instant Capacity (iCAP)
October 29, 2013
(B9073BA)
 rx8640
 rx8620
 rx7640
 rx7620
 rp8420
 rp8400
 rp7420
 rp7410
HP-UX 11i v3
iCAP
B.11.31.10.03.00.00
(B9073BA)
 HP Integrity
Superdome 2
 Superdome
 rx8640
 rx8620
 rx7640
 rx7620
 Superdome
 rp8440
 rp8420
 rp8400
 rp7440
 rp7420
 rp7410
Software requirements HP-UX 11.11
 HP-UX 11i v1
 iCAP software bundle B9073BA (version 9.x or later)
 The kernel configuration must include the diag2 module.
 WBEM B8465BA bundle (version A.02.05 or higher)
 nParProvider bundle (version B.12.01.06.02 or higher, available from the OE media)
 If you have a virtual partitioned environment, the Virtual Partitions (vPars) software
(bundle T1335AC) must be version A.03.05 or higher. vPars is available separately and is
not included with the OE.
 (GiCAP only) The CIM Server configuration property sslClientVerificationMode must
be set to a value of “optional” on all GiCAP Group Managers and on all OS instances of
all member systems.
 Patches:
PHKL_22987: S700_800 11.11 pstat() patch (only if your system runs MeasureWare)
PHKL_23154: S700_800 11.11 dflush() patch
PHKL_25218: S700_800 11.11 PDC Call retry, PDC_SCSI_PARMS, iCOD hang fix
PHKL_26232: S700_800 11.11 Psets Enablement patch, FSS iCOD patch
PHKL_30197: S700_800 11.11 Psets & vPar, Reboot hangs, serial number
PHCO_24396: S700_800 11.11 /etc/default/tz patch
PHCO_24477: S700_800 11.11 sar (1M) patch
PHCO_29832: S700_800 11.11 reboot(1M) patch
PHCO_29833: S700_800 11.11 killall(1M) patch
For the most recent required patches, see the Instant Capacity Installation page on the HP
Software Depot (search for “B9073BA”).