HP-UX HB v13.00 Ch-15 - Serviceguard

HP-UX Handbook – Rev 13.00 Page 23 (of 108)
Chapter 15 Serviceguard
October 29, 2013
Option meaning:
-h Displays the usage, as listed above, and exits.
-v Displays the monitor version and exits.
-O log_file Specifies a file for logging (log messages are printed to
the console by default).
-D log_level Specifies the log level.
-t poll_interval Specifies the interval between volume probes.
volume_path Full block device path to at least one VxVM volume or LVM
logical volume device file for monitoring. Required.
_____________________________________________________________________________
_
cmvxserviced - monitor VxVM and CVM volumes for a high availability package.
Usage: cmvxserviced [-h, --help] [-v, --version] [-O, --log-file <log_file>]
[-D, --log-level <1-7>] [-t, --poll-interval <seconds>]
<volume_path> [<volume_path>...]
Option meaning:
-h Displays the usage, as listed above, and exits.
-v Displays the monitor version and exits.
-O log_file Log file (messages are sent to console by default)
-D log_level Specifies the log level.
-t poll_interval Specifies the interval between volume probes.
Informational Commands
_____________________________________________________________________________
_
cmeval - evaluate the impact of Serviceguard configuration and state changes
on the packages (new with A.11.20)
Usage: cmeval [-v] [-o output_file] input_file (where input file is a
modified
cmviewcl-v-f_line output)
Option meaning:
-o output_file The output file contains the list of affected packages and
is designed for simple machine parsing
input_file The input file contains the output of 'cmviewcl -v -f line'
that has been modifled for the configuration/state
changes that are to be evaluated.
-v Verbose output will be displayed.
_____________________________________________________________________________
_
cmversion - display SG version info
Usage: cmversion
_____________________________________________________________________________
_
cmviewcl - view info about a high availability cluster
Usage: cmviewcl [-v] [-f {table|line}] [-s config]
[-l {package|cluster|node|group}]
[-r {A.11.12|A.11.16|11.12|11.16}]
[-c cluster_name]
{[-n node_name]... | [-p package_name]... | [-S
site_name]...}
Option meaning:
-c cluster_name Name of the cluster to view.