HP-UX HB v13.00 Ch-13 - LVM

HP-UX Handbook – Rev 13.00 Page 39 (of 110)
Chapter 13 LVM
October 29, 2013
Boot: lvol1 on: /dev/dsk/c3t2d0s2
/dev/dsk/c2t1d0s2
Root: lvol3 on: /dev/dsk/c3t2d0s2
/dev/dsk/c2t1d0s2
Swap: lvol2 on: /dev/dsk/c3t2d0s2
/dev/dsk/c2t1d0s2
Dump: lvol2 on: /dev/dsk/c3t2d0s2, 0
6. Specify the mirrored disk as an alternate bootpath
# setboot -a <HW path of mirror>
# setboot (to check it)
7. Create an EFI boot option. This boot option will be stored in NVRAM:
Boot to EFI and enter the Boot option maintenance menu:
--------------------------------------------------------------
| EFI Boot Maintenance Manager ver 1.10 [14.61]
|
| Main Menu. Select an Operation
|
|
| Boot from a File
| >>> Add a Boot Option
| Delete Boot Option(s)
| Change Boot Order
|
| Manage BootNext setting
| Set Auto Boot TimeOut
|
| Select Active Console Output Devices
| Select Active Console Input Devices
| Select Active Standard Error Devices
|
| Cold Reset
| Exit
--------------------------------------------------------------
Select the mirror disk. (Pun1,Lun0) represents SCSI target 1, Lun 0
(c2t1d0) in our case. (Pun2,Lun0) is the original boot disk (c3t2d0):
---------------------------------------------------------------------