HP-UX HB v13.00 Ch-06 - Ignite-UX

HP-UX Handbook – Rev 13.00 Page 45 (of 58)
Chapter 06 Ignite-UX
October 29, 2013
"/var/opt/ignite/config.local"
}
6) Check the INDEX file with:
# /opt/ignite/bin/instl_adm –T
7) Please see chapter "Booting and installing an HP-UX client" to install the client.
Booting and Installing an HP-UX Client over the network
If the client system is running HP-UX 11.X or later, the bootsys(1M) command can be used or a
local network boot to install the client. It can be invoked either from a command shell, or from
the Ignite-UX screen.
If the client is currently not up and running HP-UX 11.X or later, the client has to be booted
from a local console network boot command. If the client is not in the same subnet as the Ignite-
UX server, the client has to be booted from a boothelper or for Integrity systems the EFI
command ‘dbprofile’ can be used. For more details on supported systems, please look up chapter
"Networking Issues" in the Ignite-UX Release Notes at www.hp.com/go/ignite-ux-docs.
Make sure that there is at least one available IP in the /etc/opt/ignite/instl_boottab,
/etc/bootptab or via DHCP on the Ignite-UX server respectively or the boot helper.
Note: The IP must be an unassigned IP! If you do not have any unassigned IP's available and are
using the /etc/opt/ignite/instl_boottab, reserve the client's IP and the corresponding
MAC address by inserting a line with the reserve option:
# /usr/bin/vi /etc/opt/ignite/instl_boottab
1.3.4.5:0060B0F99816::reserve (IP:MAC_address::reserve)
Booting the Client from the Ignite-UX Server - Using the User Interface
Note: The clients must be currently running HP-UX 11.x or later.
Starting the Ignite-UX screen:
# /opt/ignite/bin/ignite
Booting the client using bootsys: If there is not yet a client icon, select <ACTIONS> <BOOT NEW
CLIENT>. Enter the hostname and if required the password. After the client has booted, the
client icon will appear on the Ignite-UX screen.
Starting the client installation: Right-click the client icon and choose <INSTALL CLIENT> <New
Install>.