HP-UX HB v13.00 Ch-06 - Ignite-UX

HP-UX Handbook – Rev 13.00 Page 42 (of 58)
Chapter 06 Ignite-UX
October 29, 2013
# /opt/ignite/bin/instl_adm -T –f \
/var/opt/ignite/data/Rel_B.11.23/non_SD_config.cfg
Managing the INDEX File
The order of the INDEX file determines in which order the depots will be loaded. There must
always be a HP-UX release specific config file such as
/opt/ignite/data/Rel_B.11.23/config as the first line. If you are using the
/var/opt/ignite/config.local file, it should always be the last entry for the cfg clause.
Example 1: using the manage_index command to add the config file
/var/opt/ignite/data/Rel_B.11.23/core.cfg into the /var/opt/ignite/INDEX file for
the cfg clause "HP-UX B.11.23 Default".
# /opt/ignite/bin/manage_index -a -f \
/var/opt/ignite/data/Rel_B.11.23/core.cfg -c "HP-UX B.11.23 Default"
Example 2: adding the required config files manually to the /var/opt/ignite/INDEX file for
the cfg clause "HP-UX B.11.23 Default".
# /usr/bin/vi /var/opt/ignite/INDEX
cfg "HP-UX B.11.23 Default" {
description "This selection supplies a HP-UX B.11.23
default installation"
"/opt/ignite/data/Rel_B.11.23/config"
"/opt/ignite/data/Rel_B.11.23/hw_patches_cfg"
"/var/opt/ignite/data/Rel_B.11.23/core.cfg"
"/var/opt/ignite/data/Rel_B.11.23/individual_patches.cfg"
"/var/opt/ignite/data/Rel_B.11.23/my_applications.cfg"
"/var/opt/ignite/config.local"
}
Modifying/Adding Depots
Use make_depots, swcopy or swremove to edit your depots. Rerun make_config for the
corresponding release to update the config files. Run manage_index for each newly added
software depot.
Example 1 - Creating SD-UX Depots for an HP-UX 11.23 Installation
1) Look up the device file for the DVD drive.
# /usr/sbin/ioscan -fnC disk
Class I H/W Path Driver S/W State H/W Type Description
================================================================================
disk 0 8/0/19/0.6.0 sdisk CLAIMED DEVICE IBM DDRS-34560WS
/dev/dsk/c0t6d0 /dev/rdsk/c0t6d0
disk 2 8/16/5.1.0 sdisk CLAIMED DEVICE TEAC DV-W28S-VS