HP-UX HB v13.00 Ch-02 - System Boot

HP-UX Handbook – Rev 13.00 Page 11 (of 14)
Chapter 02 System Boot
October 29, 2013
vxfs fsck: sanity check: root file system OK (mounted read/write)
Checking hfs file systems
/sbin/fsclean: /dev/vg00/lvol1 (mounted) ok
HFS file systems are OK, not running fsck
Checking vxfs file systems
/dev/vg00/lvol8 :
vxfs fsck: sanity check: /dev/vg00/lvol8 OK
/dev/vg00/lvol9 :
vxfs fsck: sanity check: /dev/vg00/lvol9 OK
/dev/vg00/lvol3 :
vxfs fsck: sanity check: root file system OK (mounted read/write)
/dev/vg00/lvol4 :
vxfs fsck: sanity check: /dev/vg00/lvol4 OK
/dev/vg00/lvol5 :
vxfs fsck: sanity check: /dev/vg00/lvol5 OK
/dev/vg00/lvol6 :
vxfs fsck: sanity check: /dev/vg00/lvol6 OK
/dev/vg00/lvol7 :
vxfs fsck: sanity check: /dev/vg00/lvol7 OK
rc
The run commands are explained in detail in the System Startup Chapter, Chapter-03. The
console output is like the following:
HP-UX Start-up in progress
__________________________
Mount file systems ........................................ OK
Setting hostname .......................................... OK
Set privilege group ....................................... N/A
Display date .............................................. N/A
Save system core image if needed .......................... N/A
Enable auxiliary swap space ............................... OK
Start syncer daemon ....................................... OK
Configure LAN interfaces .................................. OK
Start Software Distributor agent daemon ................... OK
Configuring all unconfigured software filesets ............ OK
Recover editor crash files ................................ OK
Clean UUCP ................................................ OK
List and/or clear temporary files ......................... OK
Clean up old log files .................................... OK
Start system message logging daemon ....................... OK
Start pty allocator daemon ................................ OK
Start network tracing and logging daemon .................. OK
Configure HP Ethernet interfaces .......................... OK
Configure LAN interfaces .................................. OK
Start name server daemon .................................. N/A
Start NFS core subsystem .................................. OK
Start NIS server subsystem ................................ OK
Start NIS client subsystem ................................ OK
Start NFS client subsystem ................................ OK
Start multicast routing daemon ............................ N/A
Start Internet services daemon ............................ OK
Start dynamic routing daemon .............................. N/A
Start router discover protocol daemon ..................... N/A
Start RARP protocol daemon ................................ N/A
Start remote system status daemon ......................... N/A
Starting mail daemon ...................................... OK
Starting outbound connection daemons for DDFA software .... N/A
Start SNMP Master Network Management daemon ............... OK