HP-UX 11i Version 1.6 Installation and Configuration Guide

Installing Patches and Applications
How to Backup the System
Chapter 5 89
How to Backup the System
Now that you have a solid system configuration, you need to back it up.
This provides you with a stable configuration that you can use to rebuild
the system, if necessary.
You can use the Ignite-UX product for making a system recovery backup.
See the Ignite-UX Administration Guide:
http://docs.hp.com/hpux/os/11iV1.6
Depending on your work environment, you can use the following
commands:
• fbackup and frecover to create a backup archive and frecover to
restore the system, if necessary
• Ignite-UX commands: make_net_recovery
NOTE You cannot use make_tape_recovery and make_recover with HP-UX
11i v1.6. The make_net_recovery command is available.