HP-UX 11i Version 1.6 Installation and Configuration Guide

Welcome to HP-UX 11i v1.6
HP-UX 11i v1.6 Operating Environments (OEs)
Chapter 120
HP-UX 11i v1.6 Operating Environments (OEs)
Beginning with HP-UX 11i, the operating system is delivered as part of
an HP-UX Operating Environment (OE), an integrated and tested
software solution containing the operating system and selected
applications.
In HP-UX 11i v1.6, the operating system and selected applications are
provided on DVDs. To install the full OE, both DVDs are necessary. If
you do a minimum install, the always-installed applications are the only
applications included.
HPUXBase64, which consists of operating system commands and
libraries bundled for 64-bit systems.
HPUXBaseAux, which includes system manageability software such as
Event Monitoring Service (EMS), Judy Libraries, Software
Distributor (SD), Update-UX, and the new kernel configuration tool,
kcweb. This additional required core software is also referred to as
the Auxiliary OS.
Always installed network and I/O drivers required by the operating
system and installed by default:
Fibre Channel Tachlite HBA driver for the PCI adapter
intl100 driver for the A6792A card
100BASE-T driver for Ethernet adapters
1000Base-T/SX (Gigabit Ethernet) drivers for cards A4926A,
A6825A, A6794A and A6847A
SCSI Ultra4 interface driver for Itanium-based systems with the
LSI 53C1030 SCSI Ultra4 controller
Other always installed products include:
OnlineDiag, installed by default, which provides the HP-UX 11i
v1.6 Diagnostics that include STM, ODE, and EMS hardware
monitors.
Base VERITAS Volume Manager 3.1 for HP-UX (VxVM). This is
the same product that was delivered in the HP-UX 11i v1.5
release although it is no longer the default volume manager.
For more information, see the HP-UX 11i Version 1.6 Release
Notes.