HP-UX 11i Version 1.5 Read Before Installing, September 2001

Late-Breaking News
Issues Affecting the Cold-Install of HP-UX 11i Version 1.5 (B.11.20)
Chapter 2 13
Issues Affecting the Cold-Install of HP-UX 11i
Version 1.5 (B.11.20)
Browser Required for Help System
The Online Diagnostics help system requires the use of a web browser.
Therefore, in order to use the help system, you need to load the web
browser included in Media Kit.
• Netscape can be found on the HP-UX 11i Version 1.5 (B.11.20)
Application DVD.
• Make sure to install it so that you can use the Online Diagnostics
help system.
Serial Console Re-Direction is Not Supported
The ability to re-direct console activity to a serially connected terminal is
unsupported.
Cold-Install Disk Must be in HBA Table
When you cold-install an rx9610, rx4610, or i2000 system, you must be
certain that:
• The disk to be installed on resides under one of the four Host Bus
Adapters (HBA) that are selected in the LSI option ROM table.
• The HBA where the boot disks reside is the first HBA listed in the
bootable HBA table.
If either of the above is not true, you will find that boot fails and the boot
disk is not listed in the EFI table as a bootable disk. You can correct this
situation with the LSI configuration menu.
To view or change the LSI option ROM table and the HBA information,
enter the LSI configuration menu early in the system boot sequence by
pressing Ctrl-C when prompted.