HP-UX 11i Version 1 Installation and Update Guide, September 2003

Known Problems and Troubleshooting
Problems Configuring HP-UX 11i v1
Appendix B 191
You must have no duplication of SCSI IDs on a SCSI bus-the
system will hang or crash if duplicate SCSI IDs are on the bus.
See the “Checking SCSI Bus Compatibility” section of the Service
and User Guide for details on conforming and changing SCSI IDs.
The following manuals are affected:
• HP A4800A PCI FWD SCSI Host Bus Adapter Service and User
Guide (A3725-96031, E0201), page 30
• HP A5149A PCI Ultra2 SCSI Host Bus Adapter Service and User
Guide (A5149-96003, E0201), page 31
• HP A5150A PCI Dual Port Ultra2 SCSI Host Bus Adapter Service
and User Guide (A5150-96002, E0201), page 35
• HP A5159A PCI Dual Port FWD SCSI Host Bus Adapter Service and
User Guide (A5159-96002), page 31
HP-UX Apache-based Web Server Requires LD Patch
to Start and Stop
IMPORTANT Due to an ld defect, you may encounter problems starting and stopping
HP-UX Apache-based Web Server (hpuxwsApache). At the time of this
writing, HP is unable to include a patch. To fix this problem, follow the
steps below:
To verify and install the required version of ld and libdld for the
HP-UX Apache-based Web Server:
Step 1. Verify that you are using ld and libdld version B.11.32 or higher. To
determine the version, enter the following command:
ld -V
Step 2. If the version number is less than B.11.32, install Patch PHSS_26560.
See “Installing Patches” on page 139 for more information on how to
install patches.
Step 3. As root, manually start HP Apache using the following command:
/opt/hpws/apache/bin/apachectl1 start