HP-UX 11i Version 1 Installation and Update Guide, September 2003

Known Problems and Troubleshooting
Problems Configuring HP-UX 11i v1
Appendix B 189
To fix the problem, either install patch PHNE_22727 or replace the
HSC-FX card with an HSC-TX card, J3514A#001 (K-class) or
J3516A#001 (A-180 and D-Class). If you replace the card, you will also
need an FX-to-TX converter. The converter is not an HP product but has
been qualified for use with HP cards; it is made by Transition Networks,
part number C/E-100BTX-FX-04(SC).
SCSI PCI Restrictions for OLA/R
Online addition and replacement (OLA/R) of PCI HBAs is available in
HP-UX 11i v1 on the HP 9000 L-Class, N-Class, and Superdome systems.
This feature allows you to add or replace a failed HBA without having to
reboot the system.
Some restrictions in the ability to perform online addition (OLA) and/or
online replacement (OLR) apply with these SCSI HBAs:
• A4800A
• A5149A
• A5150A
• A5159A
• A5838A
You can find more information about SCSI HBA OLA/R restrictions by
going to the HP-IT Resource Center (ITRC), at the following URL:
http://itrc.hp.com
1. Go to the area for knowledge trees
2. Under "Hardware" select Networks
3. Select mass storage connectivity
4. Select scsi hba’s
5. Select technical support
This takes you to a page titled "scsi hba’s." (You might want to
bookmark this page, for future reference.)
6. Select the ola/r support link in the list on the left side of the page; this
takes you to the SCSI HBA OLA/R restrictions.