HP-UX 11i Version 1 Installation and Update Guide, September 2003

Known Problems and Troubleshooting
Update Known Problems
Appendix B 177
If this occurs, update-ux displays this message on the console before
quitting:
Loading the kernel...
/usr/ccs/bin/ld: Unsatisfied symbols:
wsio_get_service (code)
Stop...
ERROR: The kernel build failed...
What To Do Remove the USB drivers and repeat the update:
Step 1. As root, edit /stand/system:
vi /stand/system
Step 2. Find and delete all USB drivers: usbd, hsd, hub, hid
Step 3. Save the system file and quit the editor.
Step 4. Continue the update by entering:
update-ux -kernel_build
X.25 Cards Not Supported on Some Workstations
J3525A and J3526A PCI cards are not supported under HP-UX 11i v1 on
these workstations:
• B1000
• B2000
• C3X00
• J5000
• J7000
If either of these cards is installed on a workstation listed above, the
system will crash during the upgrade. If the workstation is already
running 11i, it will crash when you try to add the card. These cards are
supported on older B-, C- and J-Class workstations, as well as on
L-[123]000, N- and A-Class servers and Superdome servers.
How Do You Know
If This Affects
You?
To see if these cards are installed in your system, enter:
ioscan -kf | egrep '(10140078)|(1133b921)'