HP-UX 11i Version 1 Installation and Update Guide, June 2004

Installing and Updating System Requirements
Firmware Requirements
Chapter 354
Table 3-4 Minimum Firmware Versions for OLAR Support
a
Model or Bezel
Firmware and Patch for OLAR
b
Support
System
Firmware
Version
Minimum Current Patches
HP-UX 11.0/11i Tape Patch Name
A-Class (A400, A500) (OLAR not available on A-Class)
B-Class, C-Class,
J-Class
(Also, OLAR not available on workstations.)
L1000, L2000, rp5400,
rp5450
41.39
PHSS_25684
PHSS_25685
PF_CRHW4139
L3000 Rev A. 41.46
PHSS_25686
PHSS_25687
L1500, L3000, rp5430,
rp5470
42.19
PHSS_25686
PHSS_25687
PF_CCAW4219
N4000, rp7400 42.06
PHSS_22688
PHSS_25931
PF_CPIW4206
rp7405
rp7410, rp8400
d
Release Version
6.0
c
PDC rev 17.049
MP rev. 4.013
PF_CKEYMAT0600
Not Customer Installable
rp7420, rp8420 Release Version
1.01
PF_CRAIMED0101
Not Customer Installable
Superdome
d
Release Version
5.1
PDC rev. 36.1
MP rev. 7.26
Not Customer Installable
a. The latest system firmware is required for OLAR operations on supported
servers.
b. OLAR = OnLine add, and replace
c. This firmware is required for enabling systems to use the new Server
Expansion Unit (SEU - see the HP-UX 11i v1 Release Notes for more
information). Current rp8400 customers wishing to add the SEU to their
existing server musts replace the Core I/O boards in the main chassis with
next-generation Core I/O boards (A7109-60001).
d. System Firmware and Service Processor Firmware are not customer
installable. Please contact your HP Customer Engineer