HP-UX 11i Version 1 Installation and Update Guide, June 2004

Installing and Updating System Requirements
System Requirements
Chapter 348
For the latest list of supported systems, see the “what systems are
supported” question on this web site:
http://devresource.hp.com/STK/hpux_faq.html#C1
How to Identify Your System’s Model, OS and Software
The following topics will show how to obtain your current system
information:
Identify model To determine the model number of your system, enter:
model
Verify that HP-UX 11i v1 is supported on your system (see Table 3-1,
“Supported Systems,” on page 46).
Identify OS and OE To identify the OS version that your system is currently running, enter:
uname -r
To update to HP-UX 11i v1, your system must be currently running
either B.10.20 or B.11.00. After cold-installing or updating to
HP-UX 11i v1, you’ll notice that uname identifies the HP-UX 11i v1
release as B.11.11.
When a system has HP-UX 11i v1 installed, you can determine which
revision of HP-UX 11i v1 is installed by entering the following command:
/usr/sbin/swlist -l bundle
The HWEnable11i and HPUXBaseAux bundles indicate the current
installed revision level. The revision level is indicated both in the bundle
version number (for example, B.11.11.0603) and the description text
(for example, Hardware Enablement Patches for HP-UX 11i, June
2004).
T500, T520 X
T600 X X
V22xx, V2500, V2600 X
Table 3-1 Supported Systems (Continued)
Bezel or Model 32-bit 64-bit