HP-UX 11i Version 1 Installation and Update Guide, June 2004

Choosing a Migration Path: Cold Install or Update
Migrating from Previous HP-UX Releases
Chapter 228
Migrating from Previous HP-UX Releases
You can cold-install HP-UX 11i v1 and its accompanying operating
environment on any supported system listed in Table 3-1, “Supported
Systems,” on page 46, running any HP-UX OS. If you choose to update
an existing HP-UX OS to the June 2004 version of HP-UX 11i v1, the
system must be running either HP-UX 10.20 or 11.0. If you are updating
from a previous HP-UX 11i v1 release, see “If You Have an Existing
HP-UX 11i v1 System” on page 38. Updating from any other release
directly to HP-UX 11i v1 is not a supported migration path.
For help updating from HP-UX 10.20 or 10.30, use the Software
Transition Kit available at this web site:
http://devresource.hp.com/STK/
Table 2-1 Migrating from Previous HP-UX Releases
From:
To this HP-UX 11i v1 release with or without an
operating environment:
a
HP-UX 9.x, 10.01,
or 10.10
Cold-install HP-UX 11i v1 or update to HP-UX 10.20
before updating to HP-UX 11i v1.
b
HP-UX 10.20
Cold-install HP-UX 11i v1 or update.
b
HP-UX 10.30 Cold-install HP-UX 11i v1 or update to HP-UX 11.0
before updating to HP-UX 11i v1.
b
HP-UX 11.0
Cold-install HP-UX 11i v1 or update.
b
HP-UX 11.10
Cold-install HP-UX 11i v1.
c
HP-UX 11i v1
Update HP-UX 11i v1 OS and/or OE.
b
a. Contents of the HP-UX operating environments are listed in the Read
Before Installing or Updating to HP-UX 11i v1 Media booklet supplied
with the 11i OE Media.
b. Update using update-ux command. You can also change from 32-bit to
64-bit OS and install patches and other applications using an install
archive.
c. Cold-install HP-UX 11i v1 using Ignite-UX install tool. You can also
change from 32-bit to 64-bit OS and install patches and other
applications using an install archive.