HP-UX 11i Version 1 Installation and Update Guide, June 2004

Known Problems and Troubleshooting
Common Install and Update Error and Warning Messages
Appendix B 181
If you are cold installing systems with the sd_software_list defined for
patch bundles, you will see notes and warnings in the install and
swagent logs. Here is an example of the type of notes and warnings that
you will see:
NOTE: The patch fileset "PHSS_25169.WLMB-RUN,r=1.0" may only be
installed upon a previously installed base fileset. The
specification for this base fileset is
"Workload-Mgr.WLMB-RUN,fr=A.01.02,v=HP". Since there is no
fileset on the target or selected from the source which
matches this specification, fileset
"PHSS_25169.WLMB-RUN,r=1.0" will be excluded.
WARNING: The software specification
"GOLDAPPS11i,r=B.11.11.0306.2,a=HP-UX_B.11.11_32/64,v=HP"
refers to a bundle (or to a product, subproduct or fileset
within a bundle). Only some of the software specified could be
selected. The messages below show those items which could not
be selected and those items which were selected but generated
a warning:
* Could not apply the software selection
"PHCO_25887,r=1.0,a=HP-UX_B.11.11_32/64,v=HP"; it is not
available from depot or root "ant9:/".
Warning Displays
WARNING: There were errors installing from the first depot.
See the /var/adm/sw/swagent.log for details.
WARNING: Continuing could cause the OS update to fail
Do you want to continue ? (y/n)
What To do Press y to continue the update. Afterward, review
/var/adm/sw/swagent.log.
Selected Locale Not Available
Warning! One or more of your selected locales are not
available.
Please invoke the commands "locale" and "locale -a" to verify
your selections and the available locales.
Continuing processing using the "C" locale.