HP-UX 11i Version 1 Installation and Update Guide, June 2004

Known Problems and Troubleshooting
Update Known Problems
Appendix B 169
How Do You Know
If This Affects
You?
If you are updating a 10.20 system to either the Foundation, Enterprise,
or Mission Critical operating environment, and you have a version of
ServiceControl Manager earlier than version 2.5, you will encounter
these errors.
What To Do To resolve this problem:
Step 1. Use the swremove (1M) command to remove the existing ServiceControl
Manager bundle from the system
Step 2. With your HP-UX 11i v1 media, use the swinstall (1M) command to
install the latest version of ServiceControl Manager (B8339BA) on your
system.
Boot Error Messages Appear After Updating from
HP-UX 11.0 (with MirrorDisk/UX Installed) to HP-UX
11i v1 TCOE
If you are updating to HP-UX 11i v1 TCOE from HP-UX 11.0 with
MirrorDisk/UX installed, the following error message may appear during
the boot process:
/sbin/bcheckrc:
Checking for LVM volume groups and Activating (if any exist)
Volume group "/dev/vg00" has been successfully changed.
vgsync: Error, "vgsync" is not a valid LVM command.
vxfs fsck: sanity check: root file system OK (mounted read/write)
Checking hfs file systems
/sbin/fsclean: /dev/vg00/lvol1 (mounted) ok
HFS file systems are OK, not running fsck
Checking vxfs file systems
/dev/vg00/lvol8 :
vxfs fsck: sanity check: /dev/vg00/lvol8 OK
/dev/vg00/lvol3 :
vxfs fsck: sanity check: root file system OK (mounted read/write)
/dev/vg00/lvol4 :
vxfs fsck: sanity check: /dev/vg00/lvol4 OK
/dev/vg00/lvol5 :
vxfs fsck: sanity check: /dev/vg00/lvol5 OK
/dev/vg00/lvol6 :
vxfs fsck: sanity check: /dev/vg00/lvol6 OK
/dev/vg00/lvol7 :
vxfs fsck: sanity check: /dev/vg00/lvol7 OK
Cleaning /etc/ptmp...