HP-UX 11i Version 1 Installation and Update Guide, June 2003

Known Problems and Troubleshooting
Problems Configuring HP-UX 11i v1
Appendix B 181
EISA Cards Not Supported on 64-bit OS
EISA I/O drivers for TermIO, FDDI, 100BT and Token Ring cards are
supported on HP-UX 32-bit OS, but not 64-bit OS. You will not see an
error or warning message stating that these EISA products will not work
after installing or updating to 64-bit OS.
100BT HSC-FX Cards Do Not Work on HP-UX 11i v1
The100BT HSC-FX cards, J3514A#002 and J3516A#002, do not work
under 11i. The card is claimed, but the link does not come up.
This card is supported on K-Class, D-Class and A-180 systems. If you are
not sure whether or not the card is installed in your system, use the
appropriate command:
ioscan -kfClan | grep J3514A#002 (on K-Class)
ioscan -kfClan | grep J3516A#002 (on A-180 or D-Class)
If the card is installed, you will see the hardware path, interface number
and other details displayed on the screen.
To fix the problem, either install patch PHNE_22727 or replace the
HSC-FX card with an HSC-TX card, J3514A#001 (K-class) or
J3516A#001 (A-180 and D-Class). If you replace the card, you will also
need an FX-to-TX converter. The converter is not an HP product but has
been qualified for use with HP cards; it is made by Transition Networks,
part number C/E-100BTX-FX-04(SC).
SCSI PCI Restrictions for OLA/R
Online addition and replacement (OLA/R) of PCI HBAs is available in
HP-UX 11i v1 on the HP 9000 L-Class, N-Class, and Superdome systems.
This feature allows you to add or replace a failed HBA without having to
reboot the system.
Some restrictions in the ability to perform online addition (OLA) and/or
online replacement (OLR) apply with these SCSI HBAs:
• A4800A
• A5149A
• A5150A
• A5159A
• A5838A