HP-UX 11i Version 1 Installation and Update Guide, June 2003

Known Problems and Troubleshooting
Common Install and Update Error and Warning Messages
Appendix B174
If you have added any custom patch bundles to your install depot, the
sd_software_list definition for those bundles should be removed also.
With the sd_software_list definition removed, SD will use
autoselect_patches to resolve which patches should be installed.
Figure B-1 Example patch bundle definition from Ignite-UX configuration
file
sw_sel "HWEnable11i" {
description = "Hardware Enablement Patches for HP-UX 11i,
March 2003"
sw_source = "core"
sw_category = "HPUXAdditions"
sd_software_list =
"HWEnable11i,r=B.11.11.0303.4,a=HP-UX_B.11.11_32/64,v=HP"
(_hp_os_bitness == "32") {
impacts = "/sbin" 2016Kb
impacts = "/var" 110304Kb
impacts = "/opt" 31784Kb
impacts = "/usr" 76480Kb
impacts = "/etc" 24Kb
}
(_hp_os_bitness == "64") {
impacts = "/sbin" 2016Kb
impacts = "/var" 115792Kb
impacts = "/opt" 31784Kb
impacts = "/usr" 81968Kb
impacts = "/etc" 24Kb
}
load_with_any ~ "HPUXBaseOS" . "*
}
The following line should be removed:
sd_software_list =
"HWEnable11i,r=B.11.11.0303.4,a=HP-UX_B.11.11_32/64,v=HP"
If you are installing patch bundles from one or more depots, separate
from the 11i OE depot, the sd_software_list needs to be removed from
the patch bundle definition and the following needs to be added to the
sw_source section at the top of the configuration file:
sd_command_line +=" -x patch_match_target=true"