HP-UX 11i Version 1 Installation and Update Guide, June 2003

Known Problems and Troubleshooting
Known Problems Discovered in this Release
Appendix B 161
/sbin/bcheckrc:
Checking for LVM volume groups and Activating (if any exist)
Volume group "/dev/vg00" has been successfully changed.
vgsync: Error, "vgsync" is not a valid LVM command.
vxfs fsck: sanity check: root file system OK (mounted
read/write)
Checking hfs file systems
/sbin/fsclean: /dev/vg00/lvol1 (mounted) ok
HFS file systems are OK, not running fsck
Checking vxfs file systems
/dev/vg00/lvol8 :
vxfs fsck: sanity check: /dev/vg00/lvol8 OK
/dev/vg00/lvol3 :
vxfs fsck: sanity check: root file system OK (mounted
read/write)
/dev/vg00/lvol4 :
vxfs fsck: sanity check: /dev/vg00/lvol4 OK
/dev/vg00/lvol5 :
vxfs fsck: sanity check: /dev/vg00/lvol5 OK
/dev/vg00/lvol6 :
vxfs fsck: sanity check: /dev/vg00/lvol6 OK
/dev/vg00/lvol7 :
vxfs fsck: sanity check: /dev/vg00/lvol7 OK
Cleaning /etc/ptmp...
How Do You Know
If This Affects
You?
This error message may appear during reboot after the updating from
HP-UX 11.0 with MirrorDisk/UX installed to HP-UX 11i v1 TCOE.
MirrorDisk/UX for HP-UX 11i is not included with TCOE. As a result,
when the HP-UX 11.0 version of MirrorDisk/UX is removed from the
system, the commands associated with HP MirrorDisk/UX are not
properly deleted. This causes the LVM startup script to believe that HP
MirrorDisk/UX is installed on the system.
What To Do To resolve this problem you must purchase and install MirrorDisk/UX
for HP-UX 11i v1. See Chapter 8, “Updating Applications,” on page 131
for more information about installing applications after install or
updating your system.