HP-UX 11i Version 1 Installation and Update Guide, June 2003

Known Problems and Troubleshooting
Known Problems Discovered in this Release
Appendix B 159
VxVM Checklist Errors During TCOE Golden Archive
Install
During a TCOE golden archive installation, VxVM produces several
checklist errors if you use a saved configuration from the original
machine.
How Do You Know
If This Affects You
The problem is isolated only to customers who are installing the TCOE
operating environment from a golden image, using the original system’s
VxVM configuration file. You may see the following types of checklist
errors after you reboot the system installed with the golden image:
Configure system crash dumps
Output from "/sbin/rc1.d/S080crashconf start":
----------------------------
EXIT CODE: 0
VxVM device node check
Output from "/sbin/rc1.d/S091vxvm-nodes-check start":
----------------------------
/sbin/rc1.d/S091vxvm-nodes-check[4]: /usr/sbin/lsdev: not
found
VxVM general startup Dynamically linked vxconfigd not
accessible
Output from "/sbin/rc1.d/S092vxvm-startup start":
----------------------------
Output from "/sbin/rc1.d/S093vxvm-reconfig start":
----------------------------
/sbin/rc1.d/S093vxvm-reconfig[47]: /etc/vx/lib/vxcommon: not
found
"/sbin/rc1.d/S093vxvm-reconfig start" FAILED
Mount file systems
Output from "/sbin/rc1.d/S100localmount start":
----------------------------
checking quotas