HP-UX 11i Version 1 Installation and Update Guide, June 2003

Updating to HP-UX 11i v1
How to Update to HP-UX 11i v1
Chapter 6122
Update to HP-UX 11i v1 OS (No OE Installed)
NOTE HP strongly recommends that you update your system with an operating
environment to provide you with the an integrated and tested set of
supporting software and applications.
If you do not specify an OE bundle update-ux will only the install the
Core components (Table 4-1, “HP-UX 11i v1 Core Software Bundles,” on
page 73). Any additional software bundles associated with an OE are not
installed.
For example, to update the HP-UX 11i v1 OS, insert HP-UX 11i v1 CD1
or DVD in the local mounted drive and enter the following command:
•CD-ROM: /usr/sbin/update-ux -s /cdrom
•DVD: /usr/sbin/update-ux -s /dvdrom
Adding or Upgrading an OE
To install an OE on an 11i system not containing an OE, or to upgrade
11i to higher-level OE (for example, HP-UX 11i v1 Foundation OE to
Enterprise OE) insert the HP-UX 11i v1 media in the CD or DVD drive
and specify the new OE using update-ux. For example, to add the default
HP-UX 11i v1 OE, enter:
•CD-ROM: /usr/sbin/update-ux -s /cdrom HPUX11i-OE
•DVD: /usr/sbin/update-ux -s /dvdrom HPUX11i-OE
If you are using CDs, update-ux will prompt you to replace the current
11i OE CD with the next OE CD to complete the update. Similarly, if you
did not initially install or upgrade a workstation with the Minimal
Technical OE or Technical Computing OE, you can add that bundle using
update-ux from the Technical Computing OE media. For example, to
install the no-cost MTOE, enter:
•CD-ROM: /usr/sbin/update-ux -s /cdrom HPUX11i-MTOE
•DVD: /usr/sbin/update-ux -s /dvdrom HPUX11i-MTOE
When the update is complete, the original OE bundle wrapper (if one
existed) will be removed and replaced with the new bundle wrapper.