HP-UX 11i Version 1 Installation and Update Guide, December 2003

Known Problems and Troubleshooting
Problems Configuring HP-UX 11i v1
Appendix B198
NOTE If /dev/floppy exists, hpuxci sets default attributes for the device. The
code that does this does not null-terminate the string passed to atoi()
which results in a segfault (segmentation fault). The fix for this will
terminate the string correctly.
Auto-Port Aggregation Will Not Work on rp7410
Systems
The igelan driver for core rp2710 cards does not support Auto-Port
Aggregation (APA).
What To Do To fix this problem install patch PHNE_25833 (or any patch that
supersedes it).
EISA Cards Not Supported on 64-bit OS
EISA I/O drivers for TermIO, FDDI, 100BT and Token Ring cards are
supported on HP-UX 32-bit OS, but not 64-bit OS. You will not see an
error or warning message stating that these EISA products will not work
after installing or updating to 64-bit OS.
100BT HSC-FX Cards Do Not Work on HP-UX 11i v1
The100BT HSC-FX cards, J3514A#002 and J3516A#002, do not work
under 11i. The card is claimed, but the link does not come up.
This card is supported on K-Class, D-Class and A-180 systems. If you are
not sure whether or not the card is installed in your system, use the
appropriate command:
ioscan -kfClan | grep J3514A#002 (on K-Class)
ioscan -kfClan | grep J3516A#002 (on A-180 or D-Class)
If the card is installed, you will see the hardware path, interface number
and other details displayed on the screen.
To fix the problem, either install patch PHNE_22727 or replace the
HSC-FX card with an HSC-TX card, J3514A#001 (K-class) or
J3516A#001 (A-180 and D-Class). If you replace the card, you will also