HP-UX 11i Version 1 Installation and Update Guide, December 2003

Known Problems and Troubleshooting
Common Install and Update Error and Warning Messages
Appendix B 193
What To do Press y to continue the update. Afterward, review
/var/adm/sw/swagent.log.
Selected Locale Not Available
Warning! One or more of your selected locales are not
available.
Please invoke the commands "locale" and "locale -a" to verify
your selections and the available locales.
Continuing processing using the "C" locale.
What To Do Ignore this message which appears when updating from 10.20 in every
locale except C. The local environment, such as Japanese, is temporarily
disabled during the update session.
Multiple OE Errors
Installing both the HP-UX 11i Operating Environment and the
Enterprise Operating Environment on the same system is not a
standard update path. If you continue with this operation,
swremove(1M) the Enterprise Operating Environment after the
update is complete.
What To Do Complete the update. Then remove the HPUX11i-OE-Ent bundle using
the swremove command.
Changing from the Enterprise Operating Environment to the
Mission Critical Operating Environment at the same time as you
change from a 32 bit OS to a 64 bit OS is not a tested
operation...
Although you can change OS word-width and move from one OE to
another at the same time, we recommend performing separate
operations. In this case:
Step 1. Update OS to new word-width:
/usr/sbin/update-ux -s /cdrom -a 64
Step 2. Install the desired OE:
/usr/sbin/update-ux -s /cdrom HPUX11i-OE-MC
For more about changing OEs, see “Adding or Upgrading an OE” on
page 134.