HP-UX 11i Version 1 Installation and Update Guide, December 2003

Known Problems and Troubleshooting

Known Problems Discovered in this Release

Appendix B172

What To Do To resolve this problem, you will need to change the following entry in

your inetd.conf file:

registrar stream tcp6 nowait root

/etc/opt/resmon/lbin/registrar

with:

registrar stream tcp nowait root

/etc/opt/resmon/lbin/registrar

Problems Reading HP-UX 11i v1 DVD Media

The HP-UX 11i v1 DVD media contain large volumes of data that may

cause your DVD device to fail while reading the DVD media contents

during an update. This particularly affects you if you use Update-UX or

other Software Distributor (SD) tools. For example, you may encounter

similar error messages if you attempt to read DVD media with a large

volume of data from Update-UX:

ERROR: File "/dvd/catalog/SOE/SOE.2/INFO": No such file or

directory(2). Cannot copy it to file

"/var/tmp/BAAa04482/catalog/SOE/SOE.2/INFO".

ERROR: File "/var/tmp/BAAa04482/catalog/SOE/SOE.2/INFO" does

not exist.

ERROR: The catalog files for product "SOE,r=B.11.11" failed to

load. Check the above output for details.

ERROR: Cannot continue the Analysis Phase until the previous

errors " are corrected.

To resolve this problem, do one of the following:

• install the appropriate patches listed below before you update to the

latest version of HP-UX 11i v1 (recommended), or

•use the pfs_mount (1M) command to mount the DVD

To patch your system use the following patches (patch descriptions are in

parenthesis) for your current OS version: