HP-UX 11i v1 Installation and Update Guide, September 2005

Known Problems and Troubleshooting
SCSI PCI HBA Documentation Correction
Appendix B166
The peripheral device SCSI IDs are usually set with jumpers or a
switch on the peripheral. Refer to the peripheral manufacturer's
instructions to determine the ID of each device and how to change
it.
You must have no duplication of SCSI IDs on a SCSI bus-the
system will hang or crash if duplicate SCSI IDs are on the bus.
See the “Checking SCSI Bus Compatibility” section of the Service
and User Guide for details on conforming and changing SCSI IDs.
The following manuals are affected:
• HP A4800A PCI FWD SCSI Host Bus Adapter Service and User
Guide (A3725-96031, E0201), page 30
• HP A5149A PCI Ultra2 SCSI Host Bus Adapter Service and User
Guide (A5149-96003, E0201), page 31
• HP A5150A PCI Dual Port Ultra2 SCSI Host Bus Adapter Service
and User Guide (A5150-96002, E0201), page 35
• HP A5159A PCI Dual Port FWD SCSI Host Bus Adapter Service and
User Guide (A5159-96002), page 31