HP-UX 11i v1 Installation and Update Guide, September 2005

Known Problems and Troubleshooting
Problems Configuring HP-UX 11i v1
Appendix B 163
100BT HSC-FX Cards Do Not
Work on HP-UX 11i v1
The100BT HSC-FX cards, J3514A#002 and
J3516A#002, do not work under 11i. The card is
claimed, but the link does not come up.
This card is supported on K-Class, D-Class and A-180
systems. If you are not sure whether or not the card is
installed in your system, use the appropriate command:
ioscan -kfClan | grep J3514A#002 (on K-Class)
ioscan -kfClan | grep J3516A#002 (on A-180 or
D-Class)
If the card is installed, you will see the hardware path,
interface number and other details displayed on the
screen.
To fix the problem, either install patch PHNE_22727 or
replace the HSC-FX card with an HSC-TX card,
J3514A#001 (K-class) or J3516A#001 (A-180 and
D-Class). If you replace the card, you will also need an
FX-to-TX converter. The converter is not an HP product
but has been qualified for use with HP cards; it is made
by Transition Networks, part number
C/E-100BTX-FX-04(SC).
Table B-4 Problems Configuring HP-UX 11i v1 (Continued)
Problem Description/Action