HP-UX 11i v1 Installation and Update Guide, December 2006

Cold-Installing HP-UX 11i v1

Chapter 580

Step 12. At the end of the Guided Installation session, a screen is displayed

that enables you to review any messages that Ignite-UX encountered. If

there are any errors, resolve them before continuing with the

installation.

NOTE Ignore any message stating that /var needs to be larger than available

to hold a dump file. /var typically only needs to be set to 50-100 percent

as large as the current memory to handle dump files.

Task 4: Deselecting OE Software Bundles

If you use the Guided Installation or Advanced Installations, then

you can deselect the software bundles that are installed by default. For a

list of default-installed software bundles, see “Default-Installed

Software” on page 183.

If you choose the No User Interface option, then you cannot deselect

the default-installed software bundles.

To deselect the software bundles:

Step 1. In the Guided Installation or Advanced Installation windows,

select the Software tab.

Step 2. Use the arrow keys to select a bundle and the spacebar to change the

option.

IMPORTANT Deselecting software that HP recommends carries some risk. For

example, you may deselect a software bundle that is necessary for

another program to work correctly. If in doubt, leave the selections as

default.