HP-UX 11i v1 Installation and Update Guide, December 2006

Cold-Installing HP-UX 11i v1
Reviewing the Cold-Install Process
Chapter 574
Figure 5-1 Cold-Installing HP-UX 11i v1
Determine
install
approach
From
Media
From
Depots
1
If Factory
Integrated
From Golden
Image
2
Install 11i OS/OE using
Ignite-UX
Create 2 install depots:
• OE depot: OS/OE, QPK
4
• AR depot: Applications,
QPK
4
Create Install Golden
Image using Ignite-UX
Server
2
Install non-OE applications using
swinstall (See Chapter 7.)
Install QPK patches from the
Support Plus CD using swinstall
(See Chapter 7.)
Install image using
Ignite-UX Server
Install from OE depot using
Ignite-UX
Install non-OE applications
from AR depot using swinstall
(See Chapter 7.)
Using tools from ITRC, identify
and install additional needed
patches
3
Create recovery archive
Install 3rd-party and internal
software
1
For help creating depots, refer to the Software Distributor
Administration Guide.
2
Golden image can contain OS/OE, patches, and application
bundles. For help creating golden images, refer to the
Ignite-UX
Administration Guide.
3
The Custom Patch Manager (CPM) can be found at the ITRC
(http://itrc.hp.com) and can be used to find additional needed
patches, such as patches for non-OE applications and new security
patches.
4
Quality Pack on the Support Plus CD contains patch bundles for the
OS, OEs, and applications; Select the GOLDQPK11i depot, which
contains both the GOLDBASE11i and GOLDAPPS11i bundles, for
both the OE depot and AR depot.
Done
Create recovery archive