HP-UX 11i v1 Installation and Update Guide, December 2006

Known Problems and Troubleshooting
Common Install and Update Error and Warning Messages
Appendix B156
Multiple OE Errors Installing both the HP-UX 11i Operating Environment and
the Enterprise Operating Environment on the same system is
not a standard update path. If you continue with this
operation, use swremove(1M) to remove the Enterprise
Operating Environment after the update is complete.
Complete the update. Then remove the HPUX11i-OE-Ent
bundle using the swremove command.
Changing from the Enterprise Operating Environment to
the Mission Critical Operating Environment at the
same time as you change from a 32 bit OS to a 64 bit
OS is not a tested operation...
Although you can change OS word-width and move from one
OE to another at the same time, we recommend performing
separate operations. In this case:
• Update OS to new word-width:
/usr/sbin/update-ux -s /cdrom -a 64
• Install the desired OE:
/usr/sbin/update-ux -s /cdrom HPUX11i-OE-MC
For more about changing OEs, see “Adding or Upgrading an
OE” on page 104.
Warning Displays
WARNING: There were errors installing from the first
depot. See the /var/adm/sw/swagent.log for details.
WARNING: Continuing could cause the OS update to fail
Do you want to continue ? (y/n)
Press y to continue the update. Afterward, review
/var/adm/sw/swagent.log.
Disk Space Usage
Error
To perform this OS update, it is required that the
xxx partition have at least yyy KB of free space and
it currently has zzz KB of free space
Reconfigure your disk per the minimum recommendations in
the message. Then run the update-ux command again.
Table B-3 Common Install and Update Error and Warning Messages
Problem Description/Action