HP-UX 11i v1 Installation and Update Guide, December 2006

Known Problems and Troubleshooting
Known Update Problems
Appendix B146
Boot Error Messages
Appear After Updating
from HP-UX 11.0 (with
MirrorDisk/UX
Installed) to HP-UX 11i
v1 TCOE
If you are updating to HP-UX 11i v1 TCOE from HP-UX 11.0
with MirrorDisk/UX installed, the following error message
may appear during the boot process:
/sbin/bcheckrc:
Checking for LVM volume groups and Activating (if any
exist)
Volume group "/dev/vg00" has been successfully changed.
vgsync: Error, "vgsync" is not a valid LVM command.
vxfs fsck: sanity check: root file system OK (mounted
read/write)
Checking hfs file systems
/sbin/fsclean: /dev/vg00/lvol1 (mounted) ok
HFS file systems are OK, not running fsck
Checking vxfs file systems
/dev/vg00/lvol8 :
vxfs fsck: sanity check: /dev/vg00/lvol8 OK
/dev/vg00/lvol3 :
vxfs fsck: sanity check: root file system OK (mounted
read/write)
/dev/vg00/lvol4 :
vxfs fsck: sanity check: /dev/vg00/lvol4 OK
/dev/vg00/lvol5 :
vxfs fsck: sanity check: /dev/vg00/lvol5 OK
/dev/vg00/lvol6 :
vxfs fsck: sanity check: /dev/vg00/lvol6 OK
/dev/vg00/lvol7 :
vxfs fsck: sanity check: /dev/vg00/lvol7 OK
Cleaning /etc/ptmp...
This error message may appear during reboot after the
updating from HP-UX 11.0 with MirrorDisk/UX installed to
HP-UX 11i v1 TCOE.
MirrorDisk/UX for HP-UX 11i is not included with TCOE. As
a result, when the HP-UX 11.0 version of MirrorDisk/UX is
removed from the system, the commands associated with HP
MirrorDisk/UX are not properly deleted. This causes the LVM
startup script to believe that HP MirrorDisk/UX is installed
on the system.
To resolve this problem you must purchase and install
MirrorDisk/UX for HP-UX 11i v1.
Table B-2 Known Update Problems (Continued)
Problem Description/Action